Components of HVDC Transmission System

Electricalvoice

In the previous article, we learnt about HVDC Transmission System, its advantages and disadvantages. In this article, we will discuss the main components of HVDC Transmission System.

Contents show

The main components associated with HVDC system are as follows

  1. Converter
  2. Smoothing reactor
  3. Harmonic filters
  4. Reactive Power Supplies
  5. Electrodes
  6. DC lines
  7. AC Circuit Breaker

1. Converters

They perform AC to DC and DC to AC conversion and consists of valve bridges and transformers with tap changers. The valve bridges consist of high voltage valves connected in a six-pulse or 12 pulse arrangement.

2. Smoothing Reactors

These are large reactors having inductance as high as 1 Henry connected in series with each pole of each converter stations. They serve the following purpose:

3. Harmonic Filters

Converters generate harmonic voltages and currents on both AC and DC sides. These harmonics may cause overheating of capacitors nearby generators and interference with telecommunication systems. Filters are therefore used on both AC and DC sides.

4. Reactive Power Supplies

DC converters inherently absorb reactive power under steady state conditions. The reactive power consumed is about 50% of the active power transferred.

Under transient conditions, the consumption of reactive power may be much higher. Reactive power sources are therefore provided near the converters. For strong AC systems, these are usually in the form of shunt capacitance/capacitor.

Depending upon the demands placed on DC link and on the AC system, part of the reactive power source may be in the form of a synchronous condenser or static VAR compensator (SVC).

Capacitors associated with AC filters also provide part of the reactive power required.

5. Electrodes

Most DC links are designed to use earth as mutual conductor for atleast brief periods of time. Connection to the earth requires a large surface area conductor to minimise current densities and surface voltage gradients. This conductor is referred to as electrodes.

If it is necessary to restrict the current flow through the earth, a metallic return conductor may be provided as part of DC line.

6. DC Lines

They may be overhead lines or cables except for the number of conductor and spacing required, the DC lines are very similar to AC lines.

7. AC Circuit Breaker

For clearing faults in the transformer and taking DC links out of service, Circuit breakers are used on the AC side. They are not used for clearing DC faults twice. These faults may be cleared more rapidly by converter control.

Share on Facebook

Follow

Follow us

  1. HVDC Transmission-Advantages & Disadvantages
  2. Data Transmission Media
  3. Power Quality and Related Issues
  4. Comparison between EHVAC and HVDC Systems
  5. Components of A Substation
  6. What is Power System Protection? Need, Function and Components
  7. Charging Currents in Transmission Lines
  8. Advantages of Bundled Conductors in Transmission Lines
  9. Constant Voltage Transmission Advantages & Disadvanatges
  10. Corona Effect in transmission lines | Practical Importance